Daily maintenance steps of the silicone injection molding machine

September 13, 2024

The daily maintenance of the Silicone injection molding machine directly affects the service life of the silicone Injection molding machine. The daily maintenance of the silicone injection molding machine has a great impact on the service life of the silicone injection molding machine, including the smooth use of the normal process.

The following is the daily maintenance steps of the silicone injection molding machine:

1. Replace the glue and clean the pipe. At this time, first close the feed valve, open the discharge valve, discharge the remaining rubber material in the bucket, close the discharge valve, open the feed valve, pour the cleaning solvent into the storage bucket, activate the body, and press out the solvent according to the usual operation method.

2. If the air pressure intake is abnormal and water and gas are found, remove water from the pressure regulator filter or check whether the air pressure source is abnormal. Silicone injection molding machine before using a large amount of glue, please try a small amount to master the use of product skills, so as to avoid mistakes. When there is no problem in the test, double liquid glue machine or double liquid glue filling machine is used for mass production; The vacuum system performs vacuum defoaming treatment on the glue to remove the bubbles generated during the mixing process, or let it stand for 10-20 minutes before use, so that the bubbles generated during the mixing process will produce bubbles. The more glue you mix together.

3. Please wipe the parts of the machine regularly to improve the service life. The more glue mixed, the faster the reaction, the faster the curing speed, according to the actual production situation reasonable allocation of glue, otherwise cause glue waste. Eliminate accidents and increase production efficiency. Today, liquid control technology and dispensing equipment have been widely used in various production fields of modern industry.

4. When the machine is shut down for a long time, the power should be unplugged, which can not only extend the service life of the machine, but also save a lot of electricity. With the rapid development of industry, liquid control technology and dispensing equipment are also constantly developing to ultra-precision control, diversification and specialization. The wholesale products of container bags are susceptible to the influence of ultraviolet light in use and have problems such as aging. Therefore, in the production of the product, it is necessary to carry out anti-ultraviolet detection to ensure its good use effect. At present, the detection amount of liquid silicone machine is also gradually increasing.

Guangzhou S-guangyu Machinery & Equipment Co.,Ltd is a professional liquid silicone rubber(LSR) injection molding machine manufacturers in China since 2010,including LSR injection machine,lsr dosing unit,LSR mold ,automation and so on.We have got more than one hundred patents and serve for more than thousands of customers .If you want to learn more about our machines,please visit our web www.lsrexpert-better.com or contact us:86-13902294163.

Author:

Ms. Tan

E-mail:

overseas@s-guangyu.com

Phone/WhatsApp:

13902294163