Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
1. Quality of raw materials
The production quality of LSR injection molding machine is first affected by the quality of raw materials. LSR is a special rubber material that needs to have certain elasticity, softness and heat resistance. If the quality of raw materials is not up to standard, such as inaccurate additive content, excessive impurities, etc., it will lead to the quality of the produced LSR products is unstable, and even cannot be used. Therefore, it is very important to choose high-quality silica gel raw materials.
2. injection molding temperature
LSR injection molding is by injecting molten silica gel into the molding mold, and then solidifying at a certain temperature. The temperature of injection molding has an important effect on the physical properties and surface quality of the product. If the temperature is too high, the LSR will overheat leading to bubbles, while the temperature is too low, it is difficult to completely fill the mold pores. Therefore, controlling the injection molding temperature is an important factor to ensure the production quality.
3. Injection speed and pressure
Injection speed and pressure are also important factors in determining the quality of LSR injection molding products. Too fast injection speed will lead to LSR can not be fully filled in the injection process, and the injection speed is too slow, it is easy to cause product surface defects, such as sintering lines. Too high injection pressure will cause excessive stress in the LSR mold filling process, resulting in product deformation. Therefore, reasonable control of injection speed and pressure is an important measure to ensure the quality of LSR injection molding.
4.mold design and processing accuracy
Mold is the key equipment of LSR injection molding, mold design and processing accuracy directly affect the dimensional accuracy and surface quality of the product. The mold design should be reasonable to ensure that the LSR mold is evenly filled to avoid bubbles and defects. The mold processing accuracy should meet certain requirements to ensure the stability of product size and the perfection of product appearance. Therefore, in the process of LSR injection molding, the mold should be monitored and maintained to ensure its good condition.
5. Operation technology and experience
Operation technology and experience are one of the important factors affecting the production quality of LSR injection molding machine. Operators need to master the operating procedures and technical essentials of the LSR injection molding machine, and adjust and control the parameters of the machine. At the same time, the operator should have a certain amount of experience in the production of LSR injection molding machine, and have certain insights and solutions for the treatment of various problems. Only after systematic training and practice, can we ensure the production quality of LSR injection molding machine.
September 02, 2024
September 02, 2024
August 17, 2024
September 13, 2024
Recently, the single frequency of drying has been getting slower and slower. The number of years old has grown, and people have become lazy. As hard-earned gold coins have been deceived by Zhang...
Rotational molding process, also known as rotary molding, rotary casting molding. It is a thermoplastic hollow molding method. The powder is injected into the mold, through the heating of the mold...
1. Precision of mold manufacturing and post-wear factors 2, the plastic parts themselves shrinkage, cooling changes factors (this covers more aspects, mold flow analysis is a very deep knowledge) 4,...
Vertical injection molding machine - insert molding (insert molding) refers to the injection of resin into the mold after the preparation of the different material inserts, the molten material and...
Email to this supplier
September 02, 2024
September 02, 2024
August 17, 2024
September 13, 2024