Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
1. Cleaning and maintenance: regularly clean the internal parts of the LSR injection molding machine and the air system to keep the equipment clean. Change oil and lubricating oil regularly to ensure normal operation of equipment.
2. Debugging parameters: Before using the LSR injection molding machine, carefully debug the parameters, including the LSR injection speed, injection pressure, injection temperature, etc., to ensure stable product quality.
3. Control the quality of silica gel: use high-quality silica gel raw materials, and adjust according to the requirements of different products to ensure that the quality of silica gel meets the standards.
4. Set mold: According to product requirements, reasonable selection of mold, and set parameters of LSR injection molding machine according to mold structure and size to ensure product accuracy and quality.
5. Injection speed control: According to the requirements of the product and the characteristics of silicone, reasonable control of LSR injection speed to avoid bubbles and defects.
6. Temperature control: the nature of LSR will be affected by temperature, so it is necessary to reasonably control the temperature of the LSR injection molding machine to ensure that the fluidity and coagulation of LSR meet the requirements.
7. Operation guidance: When operating the LSR injection molding machine, it is necessary to operate in accordance with the operation manual and guidance to avoid equipment failure or product quality problems caused by improper operation.
8. Inspection and maintenance: Regularly check the parts of the LSR injection molding machine and the air system to ensure that the equipment is in good condition, and timely maintenance and replacement of damaged parts.
9. Quality inspection: The produced LSR products should be inspected to ensure that the products meet the standards, and the unqualified products are reworked or eliminated.
10. Production plan: Make reasonable production plan according to order requirements and product requirements, rationally allocate production resources to ensure production efficiency and product quality.
In short, the use of LSR injection molding machine needs to master certain operating skills, to keep the equipment clean, reasonable debugging parameters, control the quality of silicone, reasonable setting of mold, injection speed and temperature need to pay attention to, only in this way can we produce high-quality LSR products
September 02, 2024
September 02, 2024
August 17, 2024
September 13, 2024
Recently, the single frequency of drying has been getting slower and slower. The number of years old has grown, and people have become lazy. As hard-earned gold coins have been deceived by Zhang...
Rotational molding process, also known as rotary molding, rotary casting molding. It is a thermoplastic hollow molding method. The powder is injected into the mold, through the heating of the mold...
1. Precision of mold manufacturing and post-wear factors 2, the plastic parts themselves shrinkage, cooling changes factors (this covers more aspects, mold flow analysis is a very deep knowledge) 4,...
Vertical injection molding machine - insert molding (insert molding) refers to the injection of resin into the mold after the preparation of the different material inserts, the molten material and...
Email to this supplier
September 02, 2024
September 02, 2024
August 17, 2024
September 13, 2024