Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
The conveying distance of the liquid silicone feeder is limited, mainly affected by the following factors: the length, diameter and material of the conveying pipeline, the hydraulic pressure and flow of the pumping station.
First of all, the length of the conveying pipeline is one of the key factors affecting the conveying distance of silica gel. In general, the longer the length of the pipeline, the greater the pressure loss of liquid silicone in the pipeline, which affects the distance of transmission. Therefore, in order to ensure that liquid silicone can be effectively transported, the length of the pipeline needs to be reasonably arranged according to the actual situation.
Secondly, the diameter of the conveying pipe will also affect the conveying distance of the silica gel. In general, the larger the diameter of the conveying pipe, the further the conveying distance of the silica gel, because the pipe with a larger diameter can provide a larger flow cross-section and reduce the friction resistance of the liquid silica gel in the pipe. Therefore, when conveying silica gel, the appropriate pipe diameter can be selected according to the needs to improve the conveying distance.
In addition, the conveying distance of silica gel is also affected by the material of the pipeline. In general, if the inner wall of the conveying pipe is rough or not smooth, it will increase the friction of the silicone in the pipe, resulting in a reduction in its conveying distance. Therefore, when choosing the conveying pipeline, smooth materials should be selected as far as possible to reduce the friction loss of liquid silicone.
Finally, the hydraulic pressure and flow of the pumping station are also important factors affecting the silicone conveying distance. The higher the hydraulic pressure of the pumping station and the greater the flow rate, the greater the driving force of the silica gel in the transportation process, and the corresponding distance that can be transported will also increase. Therefore, when selecting a pumping station, hydraulic pressure and flow should be reasonably selected according to the transmission needs of silicone to ensure that silicone can be effectively transported to the target location.
In summary, the conveying distance of liquid silica gel is affected by a number of factors. In actual production, it is necessary to consider the length, diameter and material of the pipeline as well as the hydraulic pressure and flow of the pumping station, in order to ensure that the liquid silicone can be effectively transported to the designated location to meet the production needs.
September 02, 2024
September 02, 2024
August 17, 2024
September 13, 2024
Recently, the single frequency of drying has been getting slower and slower. The number of years old has grown, and people have become lazy. As hard-earned gold coins have been deceived by Zhang...
Rotational molding process, also known as rotary molding, rotary casting molding. It is a thermoplastic hollow molding method. The powder is injected into the mold, through the heating of the mold...
1. Precision of mold manufacturing and post-wear factors 2, the plastic parts themselves shrinkage, cooling changes factors (this covers more aspects, mold flow analysis is a very deep knowledge) 4,...
Vertical injection molding machine - insert molding (insert molding) refers to the injection of resin into the mold after the preparation of the different material inserts, the molten material and...
Email to this supplier
September 02, 2024
September 02, 2024
August 17, 2024
September 13, 2024