How to do the daily maintenance of liquid silicone machine

September 23, 2024

Daily maintenance of liquid silicone machine: The daily maintenance of liquid silicone machine directly affects the service life of silicone dispenser. The daily maintenance of the silicone dispensing machine has a great impact on the service life of the silicone dispensing machine, including the smooth use of the usual process. The daily maintenance steps of the liquid silicone machine are as follows:

1. After replacing the rubber, clean the pipe. At this time, first close the feed valve, open the feed valve, discharge the remaining glue in the bucket, then close the feed valve, open the feed valve, pour the cleaning solvent into the storage bucket, activate the body, press out the solvent and rinse it according to the usual operation method.

2. If the air pressure intake is abnormal and water vapor is found, please remove water vapor from the pressure regulator filter or check whether the air pressure source is abnormal. Before using a lot of glue, please try a small amount of silicone dispenser, master the use of product skills, to avoid mistakes. When there is no problem in the test, the double liquid drop glue machine or double liquid glue filling machine is used for mass production; The vacuum system vacuums to remove the bubbles in the glue to eliminate the bubbles generated during the mixing process, or let it sit for 10-20 minutes before use, in order to eliminate the bubbles generated during mixing in time. The greater the amount of glue mixed together.

3. Please wipe the parts of the machine regularly to extend the service life. The more glue water mixed, the faster the reaction, the faster the curing speed. Therefore, glue should be reasonably matched according to the actual production situation, otherwise it will cause glue waste. Eliminate accidents and improve production efficiency. Today, liquid control technology and dispensing equipment have been widely used in various production fields of modern industry.

4. When the machine is shut down for a long time, the power should be unplugged, which can not only extend the service life of the machine, but also save a lot of electricity. With the rapid development of industry, liquid control technology and dispensing equipment are also constantly developing to ultra-precision control, diversification and specialization. Bulk bag wholesale products are susceptible to ultraviolet rays during use and aging. Therefore, in the production of the product, it is necessary to carry out anti-ultraviolet detection to ensure its good use effect. At present, the detection amount of liquid silicone machine is also gradually improving.

Author:

Ms. Tan

E-mail:

overseas@s-guangyu.com

Phone/WhatsApp:

13902294163